Artificall

Symmetrical Broadening Wedge Strategy

Take advantage of increased volatility

Sometimes, the market’s volatility increases significantly, making its reading difficult. Prices make higher highs and lower lows without taking a new direction. This is precisely where symmetrical broadening wedges will help you. This pattern forming in highly volatile markets gives excellent bullish and bearish reversal signals.

In this post, I will show you how to use symmetrical broadening wedges to take advantage of increased volatility.

Symmetrical Broadening Wedge Strategy

What is a Symmetrical Broadening Wedge?

A Symmetrical Broadening Wedge is a chart pattern that occurs while increasing volatility periods. It appears when the price makes higher highs and lower lows within two diverging trendlines, creating a shape that looks like an expanding wedge.

This figure reflects market indecision, with traders pushing the price to extremes in both directions. The breakout of one of its shaping lines will determine the next trend.

The following screenshot shows a symmetrical broadening wedge that occurred on the WTI in the daily time unit:

Symmetrical Broadening Wedge

Symmetrical Broadening Wedge Recognition

Before plunging into the strategy, you must correctly recognize the symmetrical broadening wedges on your charts. Here are the key characteristics of this pattern you have to check:

  • Ascending top line
    The upper trendline ascends, linked by a series of higher highs.

  • Descending bottom line
    The low trendline descends, connected by a series of lower lows.

  • Diverging lines
    The two trend trendlines diverge toward each other, forming a broadening wedge shape.

  • Increased Volatility
    As the pattern develops, the price swings will increase, reflecting growing market volatility.

  • Neutral Trend
    The price evolves in both directions without showing a clear trend.

The following chart shows a symmetrical broadening wedge meeting the previous criteria:

Symmetrical Broadening Wedge Recognition

The Symmetrical Broadening Wedge Breakouts

The breakout happens when the price closes beyond one of the trendlines of the wedge. This indicates that the price will start a new trend. A breakout can be bullish or bearish.

A. Bullish Breakout

A bullish breakout occurs when the price breaks above the top line of the wedge. This means buyers have gained control, and the price would start a new bullish trend.

Here is an example of a symmetrical broadening wedge bullish breakout:

Symmetrical Broadening Wedge Breakup

B. Bearish Breakout

A bearish breakout occurs when the price breaks below the bottom line of the wedge. This signifies that sellers have taken control, and the price would start a new bearish trend.

Here is an example of a symmetrical broadening wedge bearish breakout:

Symmetrical Broadening Wedge Breakdown

How to Trade the Symmetrical Wedge Breakouts?

Trading the symmetrical broadening wedge consists of waiting for a confirmed breakout to capitalize on the coming reversal trend. After filtering the signals, you will enter the trade and place the stop-loss and the take-profit. I will show you the height steps to trade this pattern effectively:

1. Identify the Symmetrical Wedge Pattern

First, spot the symmetrical broadening wedge on your chart by drawing its two trendlines: one connecting the lower lows and the other connecting the higher highs. Ensure that the two lines diverge and the price widening ranges horizontally, forming a broadening wedge:

Symmetrical Broadening Wedge

2. Wait for the Breakout

Wait for the price to break above the upper line or below the down lines before entering the trade. It’s crucial not to jump into the trade before a completed breakout to avoid false signals:

Symmetrical Broadening Wedge Breakup

3. Validate the Breakout

Sometimes, the price closes beyond a trendline and reverses. So, it is essential to validate the breakout before entering a trade.

To validate a breakout, ensure the following candle closes in the same direction:

Validated breakup

Here is an example of a validated bullish breakout of a symmetrical broadening wedge:

Symmetrical Broadening Wedge Validated Breakup

Validated breakdown

Here is an example of a validated bearish breakout of a symmetrical broadening wedge:

Symmetrical Broadening Wedge Validated Breakdown

4. Confirm the signal with the volumes

The volume is probably the best indicator to confirm a signal. It reveals a consensus about the starting trend.

Verify that substantial or increasing volumes corroborate the signal. Ensure buyer volumes support the bullish breakout and seller volumes support the bearish breakout.

Buyer volumes

The following chart shows buyer volumes supporting a bullish breakout:

Symmetrical Broadening Wedge Breakup Buyer Volumes

Seller volumes

The following chart shows seller volumes supporting a bearish breakout:

Symmetrical Broadening Wedge Breakdown with Seller Volumes

5. Confirm the signal with the market strength

Market strength corresponds to the ability of the market to maintain its trends over time. You can utilize many indicators to evaluate the market’s strength, such as RSI, ADX, OBV, MACD, Stochastic, etc. Ensure the market’s strength goes along the signal. A positive strength must support buying signals, and a negative strength must support selling signals.

Breakup with positive strength

The following chart shows a bullish breakout supported by an increase in market strength:

Symmetrical Broadening Wedge Breakup Strengthening

Breakdown with negative strength

The following chart shows a bearish breakout accompanied by a weakening of the market strength:

Symmetrical Broadening Wedge Breakdown with Strength Weakening

6. Enter the Trade

Once the breakout is validated and confirmed, enter the trade toward the breakout.

  • Bullish breakout
    A bullish breakout of the symmetrical broadening wedge upper line means an uptrend is coming. So you can buy the market.

  • Bearish breakout
    A bearish breakout of the symmetrical broadening wedge downline means a downtrend is coming. So you can sell the market.

Exploit the trendline retests

Sometimes, the price retests the trendline after the breakout. The signal is confirmed if the price holds the level and continues toward the breakout. The retest does not happen every time, but it allows you to reinforce your position or enter the trade if you have missed the initial breakout.

Buying retest opportunity

The following chart shows a buying retest opportunity:

Symmetrical Broadening Wedge Top Line Retest
Shorting retest opportunity

The following chart shows a short-selling retest opportunity:

Symmetrical Broadening Wedge Bottom-Line Retest

7. Protect your capital by setting a Stop-Loss

A stop-loss order will allow you to limit your potential losses. This instruction automatically closes your trade if the price touches the predetermined level. This will prevent significant losses if the market moves against your position.

In principle, you should place the stop-loss outside the opposite side of the wedge. The following charts show the stop-loss position for long and short entries:

Stop-Loss for long entries

Symmetrical Broadening Wedge Long Stop-loss

Stop-Loss for short entries

Symmetrical Broadening Wedge Breakdown Stop-Loss

Be careful of the Risk/Reward ratio

As you know, a broadening wedge enlarges over time. If you set the stop-loss beyond the opposite breakout side, it could be placed too far. That could question the Risk/Reward ratio. That means the risk of loss could become greater than the expected gain. You can try to find an intermediate level to place the stop-losses.

First, Look for a key level price inside the broadening wedge. Then, place the stop-loss at some points beyond this level. Habitually, I add an ATR 14 from a key level to set my stop-losses.

8. Take your profits by setting a Target

A profit target, also called take-profit, is an exit order allowing you to close your position at a predetermined price. It is helpful to concretize your latent profit. The market will not indefinitely rise, so correctly setting your profit targets is essential.

You can calculate the profit targets from the height of the wedge. If you have validated and confirmed the signals with the marker’s strength, you can easily target the wedge height two times.

Many traders use the widest part of the wedge to evaluate its height, but I prefer to take the distance between its highest and lowest construction points. Then, I project the height one or two times from the last construction point to find the target level. The direction of the projection depends on the direction of your trade.

Target for long entries

Project the height upward from the last high point of the wedge to find the target for a long entry:

Symmetrical Broadening Wedge Breakup Target

Target for short-sale entries

Project the height downward from the last low point of the wedge to find the target for a short entry:

Symmetrical Broadening Wedge Short-Sale Target

Tips for trade successfully the Symmetrical Broadening Wedge Breakouts

  • Be sure you agree with the volatility
    The broadening wedges form in volatile markets. Ensure you can tolerate large movements in your equity curve.

  • Validate and confirm the signal
    Validating and confirming the signals will determine the success rate and expected profits of your trading.

  • Adapt your position size
    Operating a volatile market requires adapted position sizes. You should employ less capital than habitually.

  • Respect your initial stop-loss
    If you have correctly positioned your stop-loss, there is no reason to change it.

  • Focus on the best opportunities
    Each day, the markets provide numerous opportunities. You should only trade the best of all.

Symmetrical Broadening Wedge Summary

Exit mobile version